Table Of Contents; Introduction; Included In The Package - Autostart AS-6320 FM Installation Manual

Table of Contents

Introduction ..................................................... 2
Included in the Package ................................. 2
Before You Get Started.................................. 3
Harness Description ....................................... 4
6-Pin Main Ignition Harness ....................... 4
5-Pin Secondary Harness........................... 5
12-Pin Accessories Harness ...................... 5
2-Pin Harness ............................................. 8
Flashing the Hood Pin .................................... 8
What is Flashing the Hood Pin? ................ 8
The Programming Assistance Button (A.k.a.
PAB.) .............................................................. 9
How to Program the Transmitter. ................... 9
How to Enter Options Programming Mode..... 9
Horn Honk / Siren Timing (Optional) ........ 11
Auto Tach Programming Procedure........ 11
Multi-Speed Tach Programming................... 12
Tach Adjustments......................................... 12
Testing .......................................................... 12
Closing Up .................................................... 13
Supplementary Information .......................... 14

Introduction

This Guide contains all information pertinent to the installation. Most (if not all) features are
grouped in the User Guide and therefore, should you need information on a feature, you
should refer to the User Guide

Included in the Package

Please review the installation guide before beginning the installation, particularly the wiring
schematic and the programming options. it is very important that you familiarize yourself with the
programming and the operation of the system, even if you have already installed a similar system
in the past. There are many great features that may be overlooked if the manual is not read; this
would prevent you from maximizing the potential of the module. Prior to the installation, make sure
that all the hardware components required to install the system are in the box.
The following is a list of components included in the kit:
1 - Control Unit
1 - Plug-in dual-zone Shock Sensor
1 - Plug-in Push-button Valet Switch
1 - High-power 120-dB 6-tone Siren
1 - six-pin 14 AWG Harness (Ignition
Harness)
1 - five-pin 18 AWG Harness (Main
Harness)
1 - twelve-pin 22 AWG
(Accessories Harness)
1 - two-pin 22 AWG
(Accessories Harness)
P.2
Fifth Relay Output (2
nd
2 START)............................................... 14
Ignition-Controlled Door Locks ................. 14
Secure Lock.............................................. 14
Turbo Mode .............................................. 15
Safe Start (Child Safety Mode)................. 15
Siren or Horn Chirps................................. 15
Vehicle Type - Gas or Diesel................... 15
Passive Or Active Arming......................... 15
Disarmed Notification ............................... 16
Two-Stage Disarm.................................... 16
Shock Sense Bypass ............................... 16
Resetting The Module .................................. 16
Events Logging............................................. 16
Events playback ....................................... 16
Start Failure Codes via Parking Lights..... 17
Intrusion Codes ........................................ 17
Intrusion Codes via LED light ....................... 17
Chirps ........................................................... 17
Diagnostics - Parking Lights Flash Rate ...... 18
1 - five-pin Harness (Data Port Harness)
1 - Parts bag: a Hood Pin-switch, a
connector, wires and a warning label
1 - User Guide.
Harness
Harness
nd IGN or 2 nd ACC or
Installation Guide