Valet Mode; Remote Valet - Directed Electronics AM1 Owner's Manual

Hide thumbs Also See for AM1:

Table of Contents

Valet

mode

You can prevent your system from arming, by using Valet

is very useful when washing the vehicle or having it serviced. In Valet

Mode, the system will not arm, even with the transmitter, but all con-

venience functions (door locks, trunk release, etc.) will work normally.

To enter or exit Valet

switch:

light steady if you have entered Valet

repeat the steps above. The LED will turn off when exiting Valet

Remote Valet

is a convenient feature that makes bypassing the securi-

ty system easier. This feature makes it possible to exit or enter Valet

Mode using your factory keyless transmitter.

Open any door.

Press LOCK on the transmitter.

Press UNLOCK on the transmitter.

Press LOCK on the transmitter.

The status LED will stay on if you have entered Valet

go out if you exited Valet

Mode with the integrated LED/Valet

Turn ignition to "on" position,

turn to "off" position. Press

and release the integrated

LED/Valet

switch within 10

seconds. The status LED will

Mode.

DRW-35

Mode. To exit Valet

Mode, and it will

Mode. This

then

Mode,

Mode.

Table of Contents