Connecting The Monitor; Connecting Cables To The Monitor - Fujitsu Siemens Computers 5110 FA Operating Manual

Colour monitor 5110 FA

Connecting the monitor

Observe the "Safety" in the "Important notes" chapter in this operating manual.
!
CE conformance and optimum picture quality are guaranteed only if you use the data
cable supplied.
Do not cover the ventilation openings of the monitor.
The computer power plug must be pulled out!
Ê
Be sure that the monitor and the computer are switched off.

Connecting cables to the monitor

The monitor ports are protected by a cover.
Ê
Remove the cover.
1 = D-SUB connector (ANALOG)
2 = DVI-D connector (DIGITAL)
The data cable supplied has two 15-pin D-SUB connectors for the D-SUB connector of the monitor
and of the computer.
Ê
Connect one of the D-SUB connectors of the data cable to the D-SUB connector on the
monitor (1) and secure the plug-in connection by tightening the safety screws.
8 - English
ANALOG DIGITAL
AUDIO POWER
This device comp lies wit h Part 15 of the FC C Rul es. Operation is subject to the
Fujitsu Siemens Computers following two cond itions : (1) This dev ice m ay not cause harmf ul interferenc e,
Bgm. -Ulrich-Str. 1 00 and ( 2) this device must accep t any interfer ence r eceived, incl uding
interfe rence that m ay causeun desired oper ation
86199 Augs burg / Germa ny
Apparatet m a kun tilkopl es jord et stik kontakt.
Apparaten s kall an slutas till jor dat
Color Monitor 5110 FA
uttag när den ans luts till ett nätverk.
S26361-K872-V150 Seri al No.:
100-240VAC , 2A , 60/50Hz
Rev.:
M ade in Taiw an
ISO Fu j i tsu Si emen s 511 0 FA
1 3406-2 Comput e rs
Rh ei n l a n d TÜ V
Pr od uct S af et y C US Teste d T o Com p ly
TÜ V With FC C Stan d ar ds
L ISTED I.T.E. R hei nl and ge pr üf t e FOR HO ME O R OFFICE USE
E 168207,7Z 85 Pr o duc t S af e t y Si ch er hei t
1936-1100 -4240
1 4
2 3
3 = AUDIO IN socket
4 = Power connector
A26361-K872-Z100-1-5E19