Vesa-Ddc-Compatible Vga Interface; Preset Operating Modes - Fujitsu Siemens Computers 5110 FA Operating Manual

Colour monitor 5110 FA
Environmental conditions
Environment class 3K2, IEC 721
Rated range of operation:
Humidity:
Limit range of operation:
Humidity:
Condensation must be avoided.

VESA-DDC-compatible VGA interface

Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video
Electronics Standard Association, Display Data Channel) is used as the communications interface
between the monitor and the computer. If your computer is equipped with a VESA-DDC-compatible
VGA interface, it can automatically read the data for ensuring optimum operation from your monitor
and select the appropriate settings.
If the monitor 5110 FA is not yet displayed in the list of monitors, you can select the
i
following monitor instead:
Siemens or Siemens Nixdorf 4312 FA, 4611 FA 4612 FA or 461 V for DVI digital
or
Siemens or Siemens Nixdorf x178, 19P2, 19T2
(only for the resolution 1600 x 1200 / 60 Hz)

Preset operating modes

The picture position and size have been set to optimum values at the factory for the
i
operating modes listed above. Depending on the screen controller used, it may be
necessary to adjust the display position and size. In this case, you can change and save
the settings (see "Operation of the monitor").
Horizontal frequency
31,47 kHz
31,47 kHz
37,50 kHz
37,88 kHz
46,87 kHz
48,36 kHz
60,02 kHz
60,00 kHz
79,98 kHz
75,00 kHz
For ergonomic reasons, a screen resolution of 1600 x 1200 pixels (analogue or digital) is
recommended. Because of the technology used (active matrix) an LCD monitor provides a totally
flicker-free picture even with a refresh rate of 60 Hz.
20 - English
15 °C .... 35 °C
20 % .... 85 %
5 °C .... 35 °C
20 % .... 85 %
Refresh rate
70,00 Hz
70,00 Hz
75,00 Hz
60,30 Hz
75,00 Hz
60,00 Hz
75,00 Hz
60,00 Hz
75,00 Hz
60,00 Hz
Screen resolution
640 x 350
720 x 400
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1280 x 1024
1280 x 1024
1600 x 1200
A26361-K872-Z100-1-5E19