Fujitsu Siemens Computers 5110 FA Operating Manual page 18

Colour monitor 5110 FA
Setting functions in the "AUDIO MENU" menu
Calling AUDIO MENU setting window
Setting the volume for the output terminal (VOLUME)
Muting the output terminal (MUTE)
Setting functions in the "SETUP MENU" menu
Calling SETUP MENU setting window
Selecting input signal (INPUT SELECT)
If the monitor is operated with analogue or digital signals, you can switch
over between the analogue and the digital mode with this function
(depending on the graphics card you use).
Setting language for the OSD menu (LANGUAGE SELECT)
You can choose from English (default setting), German, French, Italian
and Spanish.
Setting position for the OSD menu (OSD POSITION)
You can shift the OSD menu up, down, to the left or to the right.
Setting display time for the OSD menu (OSD TIME OUT)
You can select a value from 5 to 60 seconds. If the adjusted time has run
out without the settings being saved, the OSD menu is automatically
closed.
Activating the factory settings
Activating the factory settings (MEMORY RECALL)
All settings will be reset.
16 - English
A26361-K872-Z100-1-5E19