Fujitsu Siemens Computers 5110 FA Operating Manual page 14

Colour monitor 5110 FA
Monitor settings with the buttons of the control panel
1
1 = Headphones port
2 = Buttons for the OSD menu
(On-Screen-Display)
Use the buttons of the control panel to make the following monitor settings directly while the OSD
menu is switched off.
Adjusting contrast, brightness and volume
Ê 6 5
Press the or button to activate the setting window for contrast, brightness and volume.
Ê Use the B button to select the function you want to set.
Ê 6 5
Press the or button to adjust the selected function.
Ê
Press the A button to exit the setting window.
Selecting input signal
The monitor can be operated with analogue or digital signals. You can switch between the analogue
and the digital mode (depending on the graphics card you use).
Ê
Press the B button to change the mode of the input signal.
Monitor settings using the OSD menu
With the buttons on the control panel, call up and use the integrated OSD (On-Screen Display)
menu.
The OSD menu is available in different languages. The English menu names are used in
i
the following description (default setting). With the OSD function LANGUAGE SELECT in
the SETUP MENU you can select another language.
12 - English
B
A
2
3 = Power indicator
4 = Power button
3 4
A26361-K872-Z100-1-5E19