Mounting The Stereo
7. Mount the 7273 and 727 4 brackets to the
Alpine head unit using screws supplied with
kit or reusing the screws from factory stereo,
if possible.
9. Connect the supplied Plug-and-play wiring
harness.
8. Remove hazard switch assembly, A/C
controls, cigarette lighter assembly, and sync
unit (where applicable).
1 0. Hook the Yellow/Black wire to the Foot Brake
(+)at switch above pedal
11. Hook the Yellow/Blue wire to the Parking Brake (-)
at brake in driver kick panel
12. Secure INE-Z928HD using the (4) 7mm
screws. Connect and install 7272 panel as-
sembly over radio.
3