Table of Contents
Advertisement
SOUND ADJUSTMENTS
1
Note
• Without selecting any mode with MOD/LD, only the volume level can be adjusted by pressing + or -.
LOUD (loudness) function
Press MOD/LD for more than 1.5 seconds to reinforce bass and treble especially when listening at low
volume level. To cancel the loudness, press MOD/LD for more than 1.5 seconds again.
To set the turn-on volume level
The unit can be set to always turn on at the same volume level.
After adjusting the volume with + or -, press and hold PWR down for more than 2 seconds until a beep
tone is heard.
1
Press MOD/LD to select the mode you want to
adjust from VOL (volume), BAS (bass), TRE
(Treble), BAL (balance), and FAD (fader).
The mode indicator lights up in the following order.
The selected mode changes to the volume mode when
MOD/LD is pressed for more than 5 seconds.
2
Press + or - (for less than 0.5 seconds) to adjust
the sound quality.
To change the level rapidly, press and hold + or - down
longer.
Increases the
volume level.
Increases the bass
level.
Increases the treble
level.
Decreases the level
of the left
speaker(s).
Decreases the level
of the front
speakers.
+ side
Decreases the
volume level.
Decreases the bass
level.
Decreases the treble
level.
Decreases the level
of the right
speaker(s).
Decreases the level
of the rear speakers.
- side
EN
7
Advertisement
Table of Contents
