Sound Adjustments - Aiwa CDC-X136 YU Operating Instructions Manual

SOUND ADJUSTMENTS
1
H-BASS
2
3
MUTE
1
2
3
Press PWR to turn the unit on.
Press SEL to select the mode that you
wish to adjust from: VOL(volume), BAS
(bass), TRE (treble), BAL (balance), FAD
(fader).
Thefollowing indicators appear in cyclic order.
The selected mode switches to Volume mode
if you do not proceed with step 3 within 5
seconds.
Press +/— to adjust the level.
Press and hold either botton to change the
level rapidly.
Adjust each mode referring to the audio
control indications in the display window.
Increases the
volume level
Increases the
treble level
Decreases the
level of the right
speaker(s)
Decreases the
level of the front
speakers
Decreases the
level of the left
speaker(s)
Decreases the
level of the rear
speakers
Without selecting any mode with SEL, only
the volume level can be adjusted by pressing
+/-.
MUTE button
Press this button to temporarily lower the volume.
Press it again to restore the previous volume.
The audio control indications in the display window
flash while the mute function is activated.
Press H-BASS to obtain powerful bass.
The " HBASS ' indicator lights up.
Press H-BASS again to cancel H-BASS.
11 ENGLISH