Page 1
For your convenience, record the model number and serial number (you will find them on the right side of your set) in the space provided below. Please refer to them when you contact your AIWA daaler in case of difficulty. Model lCDC-x175M, cDc-x155M seria’NO...
Page 2
Welcome Thank you for your purchasing this AIWAproduct. To optimize the performance of this unit, please read through this manual carefully. In addition to this operating instructions manual, be sure to refer to the separate installation and connections manuals as well. PRECAUTIONS This unit is designed to be operated on a 12-volt DC negative-ground electrical system only.
TABLE OF CONTENTS FRONT PANEL ..3 DETACHING AND AITACHING SELECTING THE COLOR OF THE ILLUMINATION (CDC-X175M only) .,..,,..,.,,,.,,.,,.,..,,,,.,,.,,...,,,., 5 SEITING THE CLOCK ... 5 RADIO OPERATION ... 6 PRESE~lNG STATIONS ... 7 MY INFORMATION SWITCH ... 8 SOUND ADJUSTMENTS ...
DETACHING AND ATTACHING THE FRONT PANEL You can detach the front panel from the unit and carry it with you when you leave your car unattended. When you carry the front panel out of your. car, use the supplied earring case. Press PWR to turn the unit off.
SELECTING THE COLOR OF THE ILLUMINATION (CDC-X175M only) You can select the color of the illumination between green and amber. Detach the front panel and slide the switch on the back of the front panel to the “G (green) position or “A (amber) position.
RADIO OPERATION You can turn the unit on by pressing any button except OPEN on the front panel. Press BAND to turn the radio on. The radio frequency appears. Press BAND sgsin to select the bsnd from smong F1 (FM1), F2 (FM2), F3 (FM3) snd AM.
PRESETTING STATIONS Press BAND to selects from smong FI (FM1), (FM3) snd AM. Press snd hold A.ME for more thsn 1.5 seconde to activate the eutomatic presetting function. The six stronaest available stations will be stored in memory onthepresetstation buttons 1 to 6 in order of their signal strength.
Press BAND to select a desired band from smong F1 (FM1), F2 (FM2), F3 (FM3) and AM, Prese the dasired I)reset station button, The number of the-pressed preset station button appears next to the frequency indication. Active tuning receptioncorflroi(ATRC) This unit automatically suppresses FM noise caused by varying signal strength resulting from movement of the car.
Page 10
MY INFORMATION SWITCH 5,7,9,12 Set the time you wieh the unit to turn on in Radio mode. Press TUNE T to set the hour. Press TUNE to set the minutes. Praas SEL. The “BAND SEL” indication flashes. Prees SEL again. Radio indicationflashes.
With the unit turned off, press DRV for more thsn 1.5 seconds. The “PROGRAM indication flashes in the display window. Press TUNE Y or TUNE until the “PROG ON” indication fleshes. Press DRV to turn the unit off: deactivate the timer Press TUNE Y or TUNE A repeatedly until the “PRO13 OFF indication flashes in step 2.
Page 12
SOUNLIADJUSTMENTS MUTE button Press this button to temporarily Iowerthevolume. Press it again to restore the previous volume. You can adjust the position of sound stage to best serve a particular seat just by pressing DRV. Press DRV to change the position of sound stage.
CD PLAY Press OPEN to open the front psnel and insert a CD. Cloee the front panel and press CD. CD play starts and the track number and elapsed playing time appear. CD indicator Track number J Adjust the volume with i- or -. Notes If a CD ie already inserted, press CD to start CD play.
ENGLISH CD CHANGER PLAY You can play CDs with this unit by connecting the optional AIWA ADC-M55, ADC-M35 compact disc changer, Make sure that the disc magazine loaded with the discs is inserted in the connected CD changer.
To skip tracks Buttons Press” Press and hold Skips to the next Advances track rapidly Releases to resume play Skips back to Reverses the beginning of rapidly the current track Releases to resume play *Press for less than 0.5 second. TO skip diSCS To skip to the next disc, press DISC A.
SETTING THE BEEP TONE The unit is preset at the factory to beep each time you press any button on the front panel except OPEN. You can stop beeping by following the procedure below. Press and hold down 1 and 4 at the same time while the unit ie turned on.
(right side up, etc.) Reset the unit by pressing the reset button. If this does not correct the problem, consult an AIWA service center. Allow the changer to cool off by moving the vehicle out of direct eunlight.
SPECIFICATIONS RADIO SECTION (FM) 87.5 MHz-108 MHz Frequency Range (lOo-kHz steps) 87.5 MHz-108 MHz Y-B; steps) Usable Sensitivity 50 dB Quieting Sensifivi~: 17,2 dBf 80 dB IF Rejection Frequency Response: 30 Hz-15,000 Hz 63 dB SIN Rstio 35 dB at 1 kHz Stereo Separation: Alternste Channel Selectivity 70 dB...
Page 20
88-KC4-901 -01 AIWA CO.,LTD. 980122BTM-OX Printed in China...
Need help?
Do you have a question about the CDC-X155 and is the answer not in the manual?
Questions and answers