Aiwa CDC-X15 Operating Instructions Manual page 11

Automatic Presetting
The automatic presetting function is used to automatically preset up to 6 stations for each band.
1 Press BAND to select the band.
2 Press and hold A.M down for more than 2 seconds until a beep tone is heard.
The scanning starts from the currently displayed frequency to higher frequencies and stops when 6
stations have been preset or the receivable frequencies have been scanned once.
Note
• The presetting is not performed if there is no station to be tuned in.
• When the automatic presetting is performed, the previously preset stations are automatically erased.
• To stop the automatic presetting, press A.M again or press any of the preset station buttons (1 – 6).
To scan the preset stations
Press A.M for less than 1 second.
Each preset station is tuned in for 5 seconds in order.
To stop the scanning, press A.M again or any of the preset station buttons (1 – 6).
To tune in the preset stations
Press BAND to select the band and press the preset station button (1 – 6).
The number of the preset station button is displayed and the preset station is received.
EN
11