Sound Adjustments - Aiwa CT-X419 Operating Instructions Manual

TAPE PLAYBACK
Before turning the ignition off
Be sure to eject any cassette from the unit before
turning the ignition off. Otherwise, the unit may be
damaged when you detach the front panel.
Switching modes
When the unit is in Radio mode, inserting a
cassette switches the unit to Tape Play mode
automatically.
To prevent tape problems
Before inserting acassette into the unit, make
sure that there is no slack inthe tape. If necessary,
take up the slack by inserting a pencil into the
spindle hole and winding.
90-minute or longer tapes are extremely thin and
easily deformed or damaged. They are no
recommended.
SOUND ADJUSTMENTS
21
MUTE
1
2
Press SEL to select the mode that you
wish to adjust from: VOL (volume), BAS
(bass), TRE (treble), BAL (balance) and
FAD (fader).
The following indications appear in cyclic
order.
~unL+3R5+TPE+IlRL+ FR3
If you do not proceed with step 2 within 5
seconds, the selected mode is canceled, and
the indication returns to the current source
mode.
Press +/- to adjust the fevel.
Press and hold either button to change the
level rapidly.
Adjust each mode referring to the audio
control indicators in the display window (see
page 3).
-
Decreases the
~E'k
treble level
Increases the
treble level
Decreases the Decreases the
$' )q ~
level of the right
level of the left
speaker(s)
speaker(s)
Decreases the
Decreases the
,/ ,q Jf level of the front level of the rear
speakers speakers
Without selecting any mode with SEL, only
the volume level can be adjusted by pressing
+/-.
MUTE button
Press this button to temporarily lower the volume.
Press it again to restore the previous volume.
i 1 EhfGLISH