Local Ethernet - 2Wire Gateway 100 Series Installation Manual

Gateway Installation and Support Guide
Connecting your computer to the gateway using Ethernet:
Connect the provided yellow Ethernet cable from the gateway's
1.
Ethernet port.
Proceed to page 14 to configure your Internet connection.
2.
Connecting your computer to the gateway using USB and installing the 2Wire USB driver on computers
running other Windows operating systems:
Connecting your computer to the gateway using USB requires an available USB port. Only one Windows or
Macintosh computer can be directly connected to the 2Wire gateway using the USB connection. Refer to
page 8 for instructions.
Connecting your computer to the gateway using USB and installing the 2Wire USB driver on Macintosh
computers running OS 9.X:
Connecting your computer to the gateway using USB requires an available USB port. Only one Windows or
Macintosh computer can be directly connected to the 2Wire gateway using the USB connection.
With your computer powered on and the 2Wire Setup Wizard CD still in the CD-ROM drive, double-click
1.
the icon on your desktop.
2Wire CD
Double-click
2. 2Wire USB
If you have set up an administrator name and password, the Authenticate screen opens. Enter your
3.
administrator name and password and click
Follow the on-screen instructions. When the driver installation is complete, you will be prompted to
4.
restart your computer.
12
to begin the driver installation.
.
OK
port to your computer's

LOCAL ETHERNET