Names Of Parts; Overall View; Left Side View - Sony SRMASTER SR-R4 Operation Manual

Names of Parts

For detailed information on functions and usage, see
the pages indicated in brackets.

Overall View

1
7 6 5
1.
Lid open/close button (page 22)
2.
Tally indicator (page 22)
Lights up during recording.
Flashes as a warning indication when an
error or problem has occurred.
3.
POWER (power supply) indicator
(page 21)
Lights up in green when power to the unit is
on.
4.
EJECT button (page 23)
5.
SRMemory card slot (page 22)
6.
Docking screws (page 18)
7.
LID LOCK indicator (page 22)
Lights up in orange when an SRMemory card
is mounted.
10 Names of Parts
2 3
4

Left Side View

1 2
9 8
1.
AUDIO INPUT CH-1, CH-2 (analog audio
input channel 1, 2) connectors (3-pin XLR,
female) and input selection switches
Set the input selection switches as follows,
depending on the type and level of the input
audio.
LINE: For line input
MIC: For microphone input
MIC +48V ON: For input from microphones
with external power supply
2.
EARPHONES jack (stereo mini jack) and
LEVEL knob
Adjusts the audio level.
A warning/alarm tone is also output via this
jack when an error is detected.
3.
TC IN (time code input) connector (BNC)
Connect to the time code output connector of
an external device such as a time code
generator or VTR. Use this connector when
locking the internal time code generator to
external time code.
4.
TC OUT (time code output) connector
(BNC)
Connect to the time code input connector of
an external device such as a time code reader
or VTR. Signal is supplied according to
setting made from TC Setup menu, OTHERS
>TC OUT. (see page 41)
5.
AUX IN (for future use)
6.
Docking screws (page 18)
7.
CAMERA connector (page 17)
8.
CTRL PANEL (Control Panel) connector
(page 16)
9.
AUX OUT connector (for future use)
3 4 5
7 6