Setting The Time Code And User Bits - Sony SRMASTER SR-R4 Operation Manual

Full Peak: Displays 0 dBFS as the peak value.
Full Ref: Displays the reference level (+4 dBu) as
0 dB.
Fine: Displays a scale with 0.25 dB steps and the
reference level at the center.
To set the recording levels
The recording level can be set for each channel.
Note
The recording levels cannot be set during
playback.
1
Display the AUDIO Setup menu and
then select and confirm "REC
LEVEL."
The Rec Level screen appears.
2
Select and confirm the channel number
(1 to 16).
When a channel is selected, the current
recording level is indicated by a hexadecimal
number. "UNI" is indicated for a channel
whose recording level has not been changed.
3
Move the cursor to and confirm "VAR"
t use the ADJUST knob to set and
confirm the recording level.
Rotate the knob clockwise to increase the
level, and counterclockwise to decrease the
level.
To reset the setting
Rotate the SELECT/ENTER dial to move the
cursor to RESET, and then press the dial.
When you want to change the setting
Move the cursor to and confirm "UNI."
Move the cursor to and select this
R e c L e v e l
1 2 3 4 5 6
CH1 4040 CH5 4040
CH2 4040 CH6 4040
CH3 UNI CH7 4040
CH4 UNI CH8 4040
S T O P
SR-R4:CAM
Channel numbers
32 Recording Preparations and Operations
Recording levels
7 8 9 10 11 12 13 14 15 16
CH9 UNI CH13 4000
CH10 UNI CH14 4000
CH11 UNI CH15 4000
CH12 UNI CH16 4000
UNI/VAR RESET END
0 0 : 0 0 : 0 0 : 0 0
TCG
Recording level settings
4
Set the recording level of each of the
other channels in the same way.
5
When you have finished making the
settings, move the cursor to and confirm
"END."
Setting the Time Code and User
Bits
Use the TC Setup menu to make settings related
to the time code signals.
Press the TC button to display the TC Setup
menu.
To select the time data to display
Display the TC Setup menu and then 1 select
and confirm "TIMER SEL" t2 select and
confirm the time data you want to display.
1 TIMER SEL
T C S e t u p
TIMER SEL TC
TIMER RESET
TIMER PRESET
TCR SEL LTC
TCG MODE PRST
RUN MODE R RUN
TCG SET
OTHERS
S T O P
SR-R4:CAM
TC: Displays the time code.
UBIT: Displays the user bits.
TM1/TM2: Displays the timer value of Timer 1 or
Timer 2.
2 Time data
TIMER Mode Select
Time Code
User Bit
Timer-1
Timer-2
0 0: 0 0 : 0 0: 0 0
T CR