Lookup Table (Lut) Settings; Color Control Function For The Monitor Output - Sony SRMASTER SR-PC4 Operation Manual

Lookup Table (LUT) Settings

It is possible to load lookup table (LUT) files to the LUT
banks of the unit using the web application.
The eight LUT banks provided in the unit are used to store
LUTs that are used for importing, and monitor signal
output.
LUT files stored in the banks are maintained even after the
unit is turned off.
The bit depth of LUT files can be applied 8, 10, 12, and 16-
bit data. Note, however, that the lower four of 16 bits are
ignored because of the hardware's 12-bit process.
On the contrary, when the bit depth of the input data is 8 or
10, the signal is linearly interpolated into 12-bit data.
For details on applicable LUT file formats, see "LUT File
Formats Applicable to This Board" in "Appendix".
1
Click the SRPC SETUP menu button, and click the
LUT tab.
The LUT tab screen appears.
2
Set the following items.
Item
BANK
WP check box
3
Click the Browse... button to open the local disk or
external media of the web client, then select the LUT
file. And then, click the LOAD button.
The selected LUT file is loaded to the LUT bank
selected in step 2.
Clearing the contents of a LUT bank
Select the bank whose contents you want to delete, and
then click the CLEAR button.
16
Setup
Function/settings
Selects one of the eight banks
(BANK 1 to BANK 8).
Check this box when you do not
want to overwrite the contents of
the selected LUT bank.
Color Control Function for the
Monitor Output
Color control function for the monitor output can be set
using the web application or through control panel
operation on the VTR.
1
Click the SRPC SETUP menu button, and click the
MONITOR tab.
The MONITOR tab screen appears.
2
Set the following items.
Underlined values in the table indicate default settings.
Item Function/settings
COLOR SPACE Specifies the monitor output
signal type.
RGB 4:4:4: RGB 4:4:4 signal
YCbCr: YcbCr 4:2:2 signal
LUT Selects one of the eight banks.
off: No LUT is used.
BANK1 to BANK8: The LUT in the
RANGE Specifies whether the monitor
output signal is extended from
Head to Full before the LUT and
compressed from Full to Head
after the LUT.
Pre(HtF) checkbox: Check this
Post(FtH) checkbox: Check this
specified bank is applied to
the monitor output.
box to extend the effective
signal range of a monitor
output signal with headroom
to full range before the LUT.
box to compress a full range
monitor output signal to the
effective signal range of a
monitor output signal with
headroom after the LUT.