Custom Panels - Sub-Zero IC-24R Installation Manual

PANEL INSTALLATION

Custom Panels

For integrated models, custom door panels and handle
hardware must be installed. Stainless steel panels are
available through an authorized Sub-Zero dealer. For local
dealer information, visit the find a showroom section of our
website, subzero.com.
The thickness of the custom panel can vary. A minimum
5
/ " thick panel is required, but the thickness can be
(16)
8
increased provided it does not exceed the maximum panel
weight indicated in the chart below. The depth of each
integrated model is 24"
(610)
planning the finished opening depth.
PANEL REQUIREMENTS
COLUMN
18" Models
24" Models
30" / 36" Models
TALL (DOOR)
30" Models
36" Models
DRAWER
All Drawer Panels
PANEL THICKNESS
All Panels
|
10 Sub-Zero Customer Care 800.222.7820
. Allow for panel thickness when
MAX WEIGHT
45 lb
(20 kg)
60 lb
(27 kg)
75 lb
(34 kg)
MAX WEIGHT
50 lb
(22 kg)
60 lb
(27 kg)
MAX WEIGHT
15 lb
(7 kg)
MINIMUM
5
/ "
8
Reveals between panels can vary,
CAUTION
When installing a panel thicker than 1"
may be required to prevent damage to the unit and
adjacent cabinetry.
CAUTION
As reveals between cabinetry and the unit decrease,
severe finger pinching can occur while door is closing.
Finish all sides of custom panels. They will be visible when
the door is open.
D-style handles are recommended. Stainless steel tubular
and pro handles are avail able through an authorized
Sub-Zero dealer. For local dealer information, visit the find
a showroom section of our website, subzero.com. Door
handles must be located near the edge of the panel oppo-
site the hinge and should be centered top to bottom. Drawer
handles must be located near the top edge of each panel.
(16)
DUAL INSTALLATION
When installing two units side by side in a dual installa-
tion, the opening width is the width of the two units added
together. A dual installation kit will be required for this
installation.
Dual installation kits are available through an authorized
Sub-Zero dealer. For local dealer information, visit the find a
showroom section of our website, subzero.com. For ques-
tions regarding the installation, call Sub-Zero customer care
at 800-222-7820.
1
/ " reveals are typical.
(3)
8
, the 90° stop
(25)