Network Window; Association Modes - Honeywell 7850LP-I1-5210E - Hand Held Products Dolphin 7850 User Manual

Network Window

The Network window contains the configuration options to configure how the terminal connects to your
wireless network.
You access the Network window from the
• Tapping New on the Config tab.
• Scanning for wireless network devices and adding them to your network; see
Feature on page
• Selecting an existing configuration and tapping Modify.
The Network window prompts you to complete the fields required by the connection options you select.
For example,
No Authentication or
Encryption
(Use the Browse button

Association Modes

The association mode you select from the Assoc. Mode drop-down list determine the fields that appear
on the Network window. Different types of association modes require specific information or offer certain
configuration options.
The available association modes are:
• None (see page 1-8)
• WEP (see page 1-10)
• IEEE 802.1X (WEP)
• WPA-Personal (PSK) & WPA2-Personal (PSK)
• WPA-Enterprise (EAP) & WPA2-Enterprise (EAP)
Note: The Dolphin 6100/6500/7600 with Windows CE 5.0 supports WPA2 encryption only.
None
Selecting None as the association mode means that there is authentication or encryption in the
connection process.
1 - 8
Config Tab
1-6.
WPA (EAP)
to load files located on the terminal into this configuration.)
(see page 1-9)
(see page 1-6) by
(see page 1-11)
(see page 1-12)
Using the Scan
WEP