Establishing A Connection - Honeywell 7850LP-I1-5210E - Hand Held Products Dolphin 7850 User Manual

Establishing a Connection

Requirements
The parameters you enter in the SWC depend entirely upon the wireless network established in
your facility. If you do not know what to enter in these fields, contact your network administrator.
1. On the Today screen or Desktop, tap the icon in the command bar
2. Tap the Config tab and tap New.
3. On the Network window, type in the SSID.
4. Select the Assoc. Mode that corresponds to your network configuration from the drop-down list.
Select
None
IEEE 802.1X (WEP)
WPA-Personal (PSK)
WPA2-Personal (PSK)
WPA-Enterprise (EAP)
WPA2-Enterprise
(EAP)
Note: The Dolphin 6100/6500/7600 with Windows CE 5.0 supports WPA2 encryption only.
5. The fields and options required by the association mode, encryption, and EAP methods appear on
the Network Window
6. If required by the association mode, select the Encryption method.
7. If required by the association mode, select the EAP Method; (see page 1-9).
1 - 4
To connect with...
No authentication or encryption.
WEP encryption and EAP authentication.
WPA encryption and PSK authentication.
WPA encryption and EAP authentication.
(see page 1-8) after each is selected.
.
For more information...
None (page 1-8)
IEEE 802.1X (WEP) (page 1-9)
WPA-Personal (PSK) & WPA2-
Personal (PSK) (page 1-11)
WPA-Enterprise (EAP) &
WPA2-Enterprise (EAP)
1-12)
(page