Chapter 1 - Configuring The Wlan Connection; Introduction; Accessing The Wlan Swc - Honeywell 7850LP-I1-5210E - Hand Held Products Dolphin 7850 User Manual

1
Configuring the WLAN Connection

Introduction

Note: Screen captures in this user's guide may differ from what appears on your device.
The WLAN Secure Wireless Client (SWC) configures the wireless connection of the 802.11b/g radio for
numerous Dolphin terminals.
Windows Mobile 6.5
Dolphin 9700
The different operating systems format the application windows of the SWC differently. For example, on
terminals running Windows CE, the tabs appear at the top of the window whereas on terminals running
Windows Mobile, the tabs appear at the bottom of the window.
Windows Mobile
Despite the different formatting, the content of the application window is the same on both terminals.
Server-Assigned IP Addresses
Please note that all server-assigned IP addresses use Dynamic Host Configuration Protocol (DHCP).

Accessing the WLAN SWC

On the Today screen, tap the icon in the command bar
This icon displays in different colors to indicate the status of the radio; see
page 1-2.
The SWC opens displaying the Status tab, which is empty until a connection is configured. After a
connection to an access point or network is configured and active, this tab displays the connection
status.
Windows Mobile 6
Dolphin 7600
Dolphin 9900
Windows Mobile 5.0
Dolphin 7850
Windows CE
.
Command Bar Icon Colors
Windows CE 5.0
Dolphin 7600
Dolphin 6100/6500
on
1 - 1