Config Tab; Activating The Configuration; Config Tab Buttons; Using The Scan Feature - Honeywell 7850LP-I1-5210E - Hand Held Products Dolphin 7850 User Manual

Config Tab

You manage connections and configurations on the Config tab. You also determine which configuration
the terminal uses to connect.

Activating the Configuration

To connect, you must select the configuration in the list and tap Activate. The terminal will not attempt to
connect until you tap Activate.
The Config tab stores all the configurations you have created in the list but activates only one
configuration at a time. To switch connections, simply select it on the Config tab and tap Activate.
On the Config tab, an "[x]" appears next to the activated configuration.

Config Tab Buttons

Modify
Add
Delete

Using the Scan Feature

The Scan button on the Config tab queries for the local, configured, wireless network for devices in range
of the terminal. when you tap Scan on the Config tab, the query starts, and the results appear on the
1 - 6
To modify an existing configuration, select it in the list and tap Modify. The Network
window appears displaying the data for the selected configuration. Make your
changes and tap OK to save. Then, tap Activate to start connecting.
To manually add a connection, tap Add. A blank Network window appears.
Complete Steps 5–8 of
To delete a connection, select it in the list and tap Delete.
Establishing a Connection (see page 1-4).