Download  Print this page

External Trigger Shutter - Sony XC-HR90 Technical Manual

Ccd black-and-white video camera module.
Hide thumbs


External Trigger Shutter

Inputting an external trigger pulse enables the camera
to capture fast-moving objects clearly with precise
Set DIP switches 6, 7, and 8 on the rear panel to Mode
1 or Mode 2.
There are two modes for the timing in which video
signals are obtained.
• Mode 1 (Non-reset mode)
In this mode, a video signal synchronized with a VD
signal is output after a trigger pulse is input.
– The video signal is synchronized with the external
VD signal when an external HD*/VD signal is
– The video signal is synchronized with an internal
VD signal when no external HD*/VD signal is
* External or internal synchronization is selected
automatically depending on the presence or absence
of external HD input.
• Mode 2 (Reset mode)
In this mode, an internal VD is reset, then a video
signal is output a certain period of time after trigger
pulse input.
Rear panel
When you set the trigger pulse width to 1/4 of a
second or more, the output signal changes to the
normal VIDEO signal.
DIP switches
Mode 1
Mode Settings
Mode 2


Table of Contents

   Also See for Sony XC-HR90

   Related Manuals for Sony XC-HR90

Comments to this Manuals

Symbols: 0
Latest comments: