Using Hdmi Control - Mitsubishi Electric UNISEN LT-40151 Owner's Manual

76
Appendices
Resolving CEC Conflicts
Because each manufacturer selects which CEC func-
tions to support, some devices can conflict with other
devices. If control conflicts arise, you can:
• Turn off TV control of an individual CEC-enabled
device (see below).
• Turn off CEC in the setup menu of one of the
devices.
Turning Off the TV's HDMI Control of a CEC Device
1.
Press MENU on the TV remote control.
2.
Highlight Inputs > HDMI Control and press ENTER
to open the menu.
3.
Move to the device name and press
Off to turn off the TV's ability to control the device.
4.
Press MENU to clear the menu.
Inputs > HDMI Control menu
Removing an HDMI Device
1.
Power off the device.
2.
Disconnect the HDMI cable.
3.
Press MENU on the TV remote control to enter the
TV main menu.
4.
Highlight Inputs > Name and press ENTER to open
the menu.
5.
Select Delete from the HDMI input names.
6.
MENU to clear the menus.
Press
Inputs > Name menu with Delete selected for HDMI-3.

Using HDMI Control

As an example of using HDMI Control, press PLAY on
the device itself to:
• Power on the TV
• Switch to the device (no need to display the
Activity menu)
• Begin play of the device
Direct Keys
Test your equipment with the TV's remote control to
find additional supported commands. See the table
below for commands that may be available, depending
on the individual device.
CEC-enabled VCR, DVD, and DVR functions that
to select
may be available:
Record/
Playback
If you have a CEC-enabled A/V receiver, CEC-enabled
devices connected to the A/V receiver with an HDMI
cable may also be controllable. They can be selected
from the TV's Activity menu.
CEC-enabled A/V receiver functions that may be
available:
• Try the
keys.
• To open the A/V receiver menu, follow these steps:
1.
2.
3.
4.
The MORE Menu and HDMI Control
Press MORE on the TV's remote control to see a menu
of additional supported functions for the current
CEC-enabled device. To issue a command, press the
number key indicated in the menu.
MORE key: Sample menu for
a CEC-enabled DVD player
Menu
Channel Tuning
Navigation
CHANNEL UP/DN
ENTER Digits 0–9, CANCEL
CANCEL
(to cancel)
VOLUME UP/DOWN, MUTE, and menu-navigation
While watching TV, press
Press until the Speakers option displays.
Press to select AVR as the source.
MORE and then 1 (MENU) to display the
Press
menu.
Other
GUIDE
MENU
ENTER
MORE then 9 (AUDIO).