5
52
NetCommand IR Control
About NetCommand IR Control
•
NetCommand IR home-theater control is avail-
able on 153 series TVs.
IR emitter cables are available for purchase
•
from Mitsubishi. Visit www.mitsuparts.com or call
800-553-7278 and request one of the following:
-
242D483020
(two-ended cable)
299P254020
-
(four-ended cable).
•
NetCommand setup is optional.
•
You can perform NetCommand setup when the TV
first recognizes a device during Auto Input Sensing
or at any convenient time afterward.
•
NetCommand operates by sending remote control
signals from the TV to your other devices via the
IR (infrared) emitters, telling the devices to play,
record, change inputs, adjust volume, change chan-
nels, or perform other functions. All this is accom-
plished with the TV's remote control left in TV mode.
•
You may wish to use NetCommand IR control to
supplement control of CEC-enabled devices.
Important Note on NetCommand
Be sure to connect the IR emitter cable to the
TV and properly place the emitters so that
NetCommand can control your devices.