Y Pb Pr Component Video Device; Hdmi Device - Mitsubishi Electric Unisen LT-52151 Owner's Manual

20
2. TV Connections

Y Pb Pr Component Video Device

HDTV Cable Box, Satellite Receiver, DVD/
Blu-ray Player
Suitable for use with Sound Projector surround
sound.
If your source device has an HDMI output, use the
connections for HDMI devices described on this page
instead of component video.
Required:
1. RCA-type component video cables
2. Audio cable(s)
2a. Digital audio cable
or
2b. Left/right analog stereo audio cables.
Note:
• To hear digital surround sound from the TV's
Sound Projector speaker array, connect the digital
audio output from the device to the TV's DIGITAL
AUDIO INPUT jack.
• To hear digital surround sound from an external
sound system, connect the digital audio output
from the device directly to your digital A/V receiver
instead of the TV.
AVR AUDIO OUTPUT
R
TV
Incoming from
cable service or
satellite dish
R
Pr Pb Y
AUDIO OUT
VIDEO OUT
Pr
VIDEO OUT
CABLE IN or
SATELLITE IN
L
or
2b.
1.
L
Pb Y R L
DIGITAL
AUDIO OUT
AUDIO OUT
Any device with
component video
output

HDMI Device

HDTV Cable Box, Satellite Receiver, DVD/
Blu-ray Player
Suitable for use with Sound Projector surround
sound
Required: HDMI-to-HDMI cable.
Connect an HDMI cable from the TV back panel to the
HDMI device output. HDMI devices provide video and
audio through the single cable. This connection sends
digital surround sound from the source device to the
TV's speaker array.
Mitsubishi recommends you use category 2 (high-
speed) HDMI cables to connect HDMI 1.3 source
devices. High-speed category 2 cables bring you the
full benefits of Deep Color and x.v.Color. See "HDMI
Cable Categories" on page 18 for more on HDMI cable
types.
2a.
AVR AUDIO OUTPUT
R L
HDMI-to-HDMI
cable
Any device with
HDMI output
TV