Mitsubishi Electric UNISEN LT-40151 Owner's Manual page 61

Setting Up A/V Receiver Control, continued
Case 2: Automatic A/V Receiver Switching
to a Surround Sound Device
Note: Use this setup to send digital surround sound
from a source device directly to your external sound
system. For non-surround sound source devices,
Mitsubishi recommends using the setup for Case 1,
in which audio is sent through the TV.
A device can send digital surround sound such as Dolby
DVD Player with
Digital or DTS directly to the A/V receiver. The device might
Digital Surround Sound
be a DVD player, cable box, or satellite receiver, and could
have HDMI output. A DVD player is used in this example.
Your setup may include additional devices with digital
surround sound connected directly to the A/V receiver.
These devices might be a DVD player plus a cable box
or satellite receiver.
DVD Player
digital surround sound
with
Digital
TV
Surround
video
Sound
Case 2: A/V receiver audio from a device providing
surround sound directly to the A/V receiver
1.
Inputs > AVR menu, press to highlight
In the
the name of the A/V receiver input to control. In this
example, it is the DVD input.
2.
Press ENTER on the TV's remote control.
6. NetCommand Control of an A/V Receiver
digital surround sound
DVD audio
input
A/V Receiver
Case 2: NetCommand setup for
controlling A/V receiver switching
to the A/V receiver's DVD input. The list contains
connected inputs with names assigned during Auto
Input Sensing.
3.
While the text DVD is flashing, press and hold the
DVD INPUT key on the A/V receiver's remote control.
4.
When a check appears next to
DVD INPUT key.
• If the text stops flashing before the check mark
appears, repeat this step.
• To erase the IR code just "learned," press
CANCEL while the name is highlighted.
5.
EXIT and press ENTER or
If finished, highlight
continue to set up additional A/V receiver audio
sources.
61
DVD, release the