Mitsubishi Electric UNISEN LT-40151 Owner's Manual page 39

Adjust, continued
To make audio adjustments:
• From the
1. Press
Audio
2.
Press
Speakers The Speakers option displays only if an A/V receiver or headphone connection has been
detected. Detection occurs on the right AVR AUDIO OUTPUT jack or the DIGITAL AUDIO OUT jack.
An A/V receiver can also be detected on an HDMI jack.
TV
AV Receiver
Headphones
Subwoofer Off, On
[Subwoofer
level adjust-
ment]
Bass
Controls volume of low-pitched sound from the TV speakers.
Treble Controls volume of high-pitched sound from the TV speakers.
Controls audio balance between the left and right TV speakers; available only when Sound Mode
Balance
is Stereo.
Sound Mode Stereo
Surround
Music
Night
Adjust > Audio menu:
to highlight an option
to adjust.
Turns on the internal TV speakers.
Turns off the TV speakers so you hear sound only from a connected A/V receiver.
Note: When you disconnect an analog A/V receiver, be sure to change the
Speakers setting to TV to hear sound from the TV speakers.
Turns off the TV speakers so you hear sound only from connected headphones.
See page 18. This option is not available if DIGITAL AUDIO OUTPUT is connected.
The Subwoofer option displays only if a subwoofer connection has been identi-
fied on the SUBWOOFER OUTPUT jack. The setting you select is applied to all TV
inputs.
Use Off to turn off audio to a connected subwoofer.
To adjust the subwoofer volume level, highlight Subwoofer and press ENTER to
display an adjustment slider.
No special audio effects from the TV speakers; monaural programs are played as
mono, stereo and surround sound are played as stereo.
• Programs with surround sound are played with Sound Projector surround
sound.
• Other audio is modified:
- For monaural (non-stereo) programs, creates a simulated stereo effect.
- For stereo programs, creates a simulated
Optimizes Sound Projector speakers for music listening.
Directs sound to a specific area to lessen the disturbance to others outside the
room. Settings are reset to the default when you power down the TV.
1. Position yourself in the seating area.
2. ENTER to display an adjustment slider.
Press
3.
Press to adjust the direction of the sound beams until sound seems the
loudest.
4. TV Menus
While watching TV:
•
9 (AUDIO) in the on-screen menu. Press to
select the audio option you want to change. Press
to change settings.
surround sound effect.
Press the MORE key and then
39