Operating Netcommand-Controlled Devices - Mitsubishi Electric UNISEN LT-40151 Owner's Manual

Operating NetCommand-Controlled Devices

Controlling Most Device Types
As an example of NetCommand control, if you are
watching your cable box and you wish to tune to the
next channel higher, press CHANNEL UP. NetCommand
then sends the "learned" channel-up control signal to
the cable box.
1.
Perform NetCommand setup for the device as
described in this chapter.
2.
When you wish to use the device, press
3.
Press to highlight the icon for the device.
4.
Press ENTER to switch the TV to the device.
Special Operation Methods
Key Name in
Special Operation Description and Setup
Learning Screen
Power On Manual Power On/Off
Use for devices that have only one POWER key.
Power On Automatic Power On/Off
This feature is only for devices that have separate
Power Off
POWER ON and POWER OFF keys on their original
remote controls. If your device does not have a
separate POWER OFF key, do not use the Power
Off learning position; use only the Manual Power
ON/OFF method described above.
In the NetCommand Learn screen:
a. "Learn" the Power On command in the
Power On learning position.
b. "Learn" the Power Off command in the
Power Off learning position.
Menu Displaying a Menu for the Current Device
"Learn" the MENU key on the original remote in the
Menu learning position.
Guide Displaying the On-Screen Program Guide
(cable box or satellite receiver)
1. "Learn" the
the Guide learning position.
2.
Learn the
original remote in the Page Up and Page
Down learning positions.
ACTIVITY.
GUIDE key on the original remote in
PAGE UP and PAGE DOWN keys of the
5. NetCommand IR Control
Note: if you have set up automatic input switching for
the A/V receiver, the A/V receiver will automati-
cally switch to the correct input for the device.
5.
To operate the device using the
control, press the side button to put the remote
control into TV mode.
6.
Point the remote control at the
and press the key for the desired function.
7.
MORE key to access additional key func-
Press the
tions you may have "learned" for the device.
How to Use
1. Press ACTIVITY.
2.
Press to highlight the icon for the
device to be powered on or off.
3. With the Activity menu still displayed, press
POWER to send the power signal; you may
need to press POWER twice.
Note: If you press POWER without the Activity
menu displayed, the TV will turn off.
4. Press ENTER to switch the TV to the device.
• To Power On the Device
1. Press ACTIVITY.
2.
Press
the device to be powered on or off.
3. Press ENTER to switch the TV to the
device and NetCommand will send the
Power On command to the device.
To Power Off the Device
•
When you turn the TV off, the TV sends all
learned Power Off commands to all devices.
Press MORE and then 1 to send the menu
command to the current device.
1.
While watching the device, press
display the guide.
2. Press PAGE UP/DOWN ( ) to send the Page
Up/Dn commands for the guide.
TV's remote
TV (not the device)
to highlight the icon for
GUIDE to
55