Connection - Sony EVI-D80 Technical Manual

1) When the camera is connected to a computer with a VISCA cable (cross type, RS-232C), you can operate the
camera with the computer. To obtain a cable, consult the dealer where you bought your camera.
2) For details on how to connect using VISCA RS-422, see page 26.
Notes
 You cannot connect your Color Video Camera to a
computer that is not equipped with either video input
or an S-Video input connector. You might not be able
to use your existing computer with your Color Video
Camera unless you provide the computer with a
video capture board and/or software. Consult your
computer dealer or manufacturer for details.
Video cable
(not supplied)
to VIDEO
S-Video cable (not supplied)
to S VIDEO
VISCA cable (not supplied)
to VISCA IN
to VISCA OUT
to VISCA RS-422 2)
to DC 12V
 Use only the AC power adaptor (JEITA type4)
 Do not make VISCA RS-232C and RS-422

Connection

to Video
input
to S-Video
input
1)
to RS-232C
To VISCA IN of other
EVI-D80N/D80P/ Computer, TV or VCR
D90N/D90P (when
with a video input
connecting to more
jack
than one camera)
AC power adaptor
(supplied)
Power cord (supplied)
supplied with the unit. Do not use any other AC
power adaptor.
Polarity of the plug
connections at the same time, as this may cause
malfunctions.
to AC outlet
4