Common Tab - Setting The Image Memory Function; Capacity Warning - Sony Ipela SNC-RS86N User Manual

Common Tab — Setting the image
memory function
Image memory
To use the image memory function, select On.
Selected root directory
Select a memory in which you want to save an image.
The current memory space is displayed on the right.
Built-in memory: Built-in memory of this camera
CF memory card: CF memory card inserted into the
CF card slot of the camera
Notes
• The image and audio files recorded in the built-in
memory are deleted when the Selected root directory
setting is changed.
• If the camera is powered by PoE, it will not start when
the CF card is inserted. (SNC-RH124, SNC-RS46N/P,
SNC-RS44N/P only)
Overwrite
Select On to overwrite the file when there is insufficient
memory space to record the image in the built-in
memory or CF memory card.
On: Overwrite is enabled and old files will be
overwritten in the order of date.
Off: Overwrite is prohibited. No recording will be
performed.

Capacity warning

Select On to send a warning mail to the Administrator
when the memory space of the built-in memory or CF
memory card is low or the memory is full. Select Off if
you do not want to send a warning mail.
On: A warning mail is sent to the Administrator.
Off: A warning mail is not sent to the Administrator.
82
Recording Images in Memory — Image memory Menu
Note
When Overwrite is set to On, a warning mail is not sent
to the Administrator.
SMTP server name
Type the name of the SMTP server for sending an e-
mail, using up to 64 characters.
Otherwise type the IP address of the SMTP mail server.
SMTP port number
Enter a port number from 25 to 65535.
The standard port number is 25.If TLS is enabled, the
standard port number for SMTPs is 465.
Use TLS
To use the encryption function by TLS, select On.
Note
The model on sale in China does not support the TLS
function.
STARTTLS
To use the encryption function by STARTTLS, select
On.
Note
The model on sale in China does not support the
STARTTLS function.
Authentication
Select whether authentication is required when you send
an e-mail.
Off: No authentication is required when an e-mail is
sent.
On: Authentication is required when an e-mail is sent.
Select one of the authentication methods from the
following and specify the POP server name, User
name and Password as required.
SMTP: SMTP authentication is required.
POP before SMTP: POP before SMTP
authentication is required.
Note
When you set Authentication to On, be sure to select
either or both SMTP or/and POP before SMTP.
POP mode
Select POP3 or APOP as the authentication method for
POP authentication.
Note
The model on sale in China does not support the APOP
authentication.