Using The System Utility; Snc Viewer - Sony Ipela SNC-RS86N User Manual

Multicast: This protocol is selectable when
Multicast streaming (page 50) is On. When
Multicast is selected as the transmission port, RTP
(Real-time Transport Protocol) and UDP multicast
techniques are adopted for video/audio
transmission. By selecting it, the network
transmission load of the camera can be reduced. If
a router that does not correspond to a multicast or
firewall is installed between the camera and the
computer, video/audio may not play back properly.
In this case, select TCP or Unicast.
30

Using the System Utility

Using the System Utility
You can download system utility from the tools tab on
the main menu.
To use the utility, click Download to begin download.

SNC viewer

SNC viewer is an application which allows you to set the
initial state of the viewer.
Installing the SNC viewer
1
Execute the downloaded SNCViewer.msi file.
2
Install the SNC viewer following the instructions
on the wizard.
When the license agreement policies are displayed,
agree after reading them carefully and install the
SNC viewer.
Using the SNC viewer
Click SNC viewer in the control panel.