Using The System Utility; Snc Viewer - Sony Ipela SNC-EP520 User Manual

Multicast: This protocol is selectable when
Multicast streaming (page 50) is On. When
Multicast is selected, RTP (Real-time Transport
Protocol) and UDP multicast techniques are
adopted for video/audio transmission. By selecting
it, the network transmission load of the camera can
be reduced. If a router that does not correspond to a
multicast or firewall is installed between the camera
and the computer, video/audio may not play back
properly. In this case, select TCP or Unicast.
Note
When connecting via a proxy server, neither Unicast nor
Multicast can be selected.

Using the System Utility

You can download system utility from the tools tab on
the main menu.
To use the utility, click Download to begin download.

SNC viewer

SNC viewer is an application which allows you to set the
initial state of the viewer.
Installing the SNC viewer
1
Execute the downloaded SNCViewer.msi file.
2
Install the SNC viewer following the instructions
on the wizard.
When the license agreement policies are displayed,
agree after reading them carefully and install the
SNC viewer.
Using the SNC viewer
Click SNC viewer in the control panel.
31
Using the System Utility