When Using Windows Vista - Sony Ipela SNCA-ZX104 User Manual

3
Select Windows Firewall and select Off in the
Windows Firewall dialog.
This unit will be listed.
If you want to keep Windows Firewall On, continue
with the following steps.
4
Select the "Exceptions" tab.
5
Click Add Program....
8
Assigning the IP Address to the Unit
6
In the Add Program dialog, select SNC toolbox and
click OK.
SNC toolbox is added to the Programs and Services
list.
7
Click OK.
When the above procedure is completed, the unit
connected to the local network is displayed in SNC
toolbox.

When using Windows Vista

Installing software
A warning message regarding the active contents may
appear when you install SNC toolbox from the CD-
ROM. In this case, operate as follows: