Language; Configuration Of The Administrator Menu; Displaying System Information - System Menu; System Tab - Sony Ipela SNCA-ZX104 User Manual

Click this button to nullify the set values and return to
the previous settings.
General notes on menus
• One-byte katakana character is not valid for any text
field, such as User name.
• After changing a setting on a menu, wait at least 10
seconds before turning off the power of the unit.
If the power is turned off immediately, the new setting
may not be stored correctly.

Language

Set language from pull-down.
Configuration of the Administrator
menu
System
Displays the System menu. For details, see "Displaying
System Information — System Menu" (page 16).
Serial
Displays the Serial menu for setting Serial PTZ
operations. For details, see "Configuring Serial PTZ
Operations — Serial Menu" (page 17).
Network
Displays the Network menu for setting the network
connection. For details, see "Configuring the Network
— Network Menu" (page 18).
SSL
Displays the SSL menu for performing SSL
communication between the client device and unit.
("Setting the SSL function — SSL Menu" on page 19)
User
Displays the User menu for setting the log in user name
and password. ("Setting the User — User Menu" on
page 21)
16
Displaying System Information — System Menu
Displaying System
Information
Menu
When you click System in the Administrator menu, the
System menu appears.

System Tab

Serial number

The serial number of the unit is displayed.

Software version

The software version of this unit is displayed.

Initialize Tab

Reboot
Used when rebooting the system.
Click Reboot, and the message "This System will be
rebooted. Are you sure?" appears. Click OK to reboot
the unit. It takes about two minutes to restart.
Factory default
Resets the unit to the factory settings.
Retain current network settings
When this item is checked, only the current network
settings will be retained after reset.
Click Factory default, and the message "Setup data will
be initialized. Are you sure?" appears. When you click
OK, the network indicator on the unit starts to blink.
After adjustments of the default settings have finished,
the unit reboots automatically. Do not turn off the unit
until the unit reboots.
— System