Starting The Software; Configuring Windows Firewall - Sony Ipela SNCA-ZX104 User Manual

If the pop-up "AutoPlay" appears when a CD-ROM is
inserted into the CD-ROM drive, click Install or run
program.
Program name
Note
If you click Open folder to view files, the Web browser
will not open automatically. In this case, double-click
the "index.htm" file in the CD-ROM.
If the message "Internet Explorer" appears, click Yes.
If the message "File Download – Security Warning"
appears, click Run.
Program name
Note
If you select Save in the "File Download – Security
Warning" dialog, you will not be able to perform
installation correctly. Delete the downloaded file, and
click the Setup icon again.
If the message "Internet Explorer – Security Warning"
appears, click Run.
Program name
If the message "User Account Control – An unidentified
program wants access to your computer" appears, click
Allow.
The software installation starts.

Starting the software

When you start SNC toolbox, the message "User
Account Control – An unidentified program wants
access to your computer" may appear. In this case, click
Allow.

Configuring Windows Firewall

SNC toolbox may not operate correctly depending on
the configuration of Windows Firewall. (This unit may
not be listed even if it is detected.) In this case, confirm
the Windows Firewall configuration as follows:
1
Select Control Panel from the Start menu of
Windows.
2
Click Windows Firewall.
3
Select Turn Windows Firewall on or off.
"User Account Control – Windows needs your
permission to continue" may appear. In this case,
click Continue.
Assigning the IP Address to the Unit
9