GE JB745SFSS Use And Care Manual page 31

Oven
frame
Door
frame
Release
buttons
Push in
Pull down
Lift-Off Upper Oven Door
To remove the door:
Fully open the door.
Lift up on the hinge lock toward the oven
frame until they stop.
Close the door to 45 degrees (you will feel
the door stop). The hinge lock will contact
the oven frame.
On both sides of the door, press down on
the release buttons on each hinge.
Lift door up until it is clear of the hinge.
Pull on hinge arms slightly to relieve
pressure on the locking tabs.
Push the hinge locks down onto the hinge.
Push the hinges in toward the unit so they
are closed.
(on some models)
To replace the door:
Pull the hinges down away from the oven
frame to the fully open position.
Lift up on the hinge locks toward the oven
frame until they stop.
The hinges will release to the 45-degree
position. The hinge locks will contact the
oven frame.
Slide the door back onto the hinges. Make
sure the buttons pop back out.
Fully open the door.
Push the hinge locks down onto the hinge.
Close the oven door.
GEAppliances.com
31