Installation (Vwh 18"H. Wall & Vcwh Chimney Wall Hoods) - Viking VBCV36381 Installation Instructions Manual

Connect black to black, white to white, and the
green/bare wire under the green screw.
NOTE: Housing wiring must be properly installed for
wiring to be correct when wiring unit.
Assemble brackets to baffles and insert charcoal filters. Slide filter front over front lip. Push filter rear up, then
Slide spacer front over front lip. Push spacer rear up, Slide filter front over front lip. Push filter rear up, then
then slide back over rear lip.
36
Replace electrical box cover. Make connection to
breaker box.
slide back over rear lip.
slide back over rear lip.
Installation
(VWH 18"H. Wall & VCWH Chimney Wall Hoods)
Measure down 1-13/16 (4.6 cm) from desired height of
hood and secure 1-1/2" x 3/4" wood strip (provided
locally) to wall using screws provided.
CAUTION: Secure vent hood to wall using screws
provided. Use additional mounting screws and wall provided, make sure top mounting screws are secured
anchors, if necessary. into soffit or cabinet framing use additional mounting
Slide filter front over front lip. Push filter rear up, then
37
Use additional mounting screws to secure hood to
wood strip.
CAUTION: If not using a duct cover, using screws
screws, if necessary.
slide back over rear lip.