Advertisement
Installation
(BVWH 18"H. Wall Hoods)
1
1 -
1 3
( 4
/ 1
. 6
6 "
1-1/2"x 3/4"
c m
)
(3.8 cm) x (1.9 cm)
5/16"
wood strip
nut driver
Measure down 1-13/16 (4.6 cm) from desired height of
hood and secure 1-1/2" x 3/4" wood strip (provided
locally) to wall using screws provided.
3
5/16"
nut driver
CAUTION: Secure vent hood to wall using screws
provided. Use additional mounting screws and wall
anchors, if necessary.
To install ventillation kit
refer to ventillation kit
installation instructions.
10
2
Slot for
wood strip
5/16"
nut driver
Use additional mounting screws to secure hood to
wood strip.
CAUTION: If not using a duct cover, using screws
provided, make sure top mounting screws are secured
into soffit or cabinet framing use additional mounting
screws, if necessary.
4
Slide spacer front over front lip. Push spacer rear up,
then slide back over rear lip.
5
Slide filter front over front lip. Push filter rear up, then
slide back over rear lip.
Duct Cover Option
(18"H. Wall Hoods)
1
Measure distance from ceiling to canopy.
11
6
Slide filter front over front lip. Push filter rear up, then
slide back over rear lip.
2
Slide the duct cover in place and fasten from inside
canopy using the sheet metal screws provided.
Advertisement
