Connecting with a Computer
Equipped with an Analog RGB
Connector
Attach the optional LKRI-001 analog input board to the
input board attachment part on the projector, and connect
with a computer.
Left side
INTER LOCK ETHERNET
RS232C
R/G/B/HD/VD
connectors
Computer
Note
Select "RGB" in "Signal Mode" of "Input Source" in the
PICTURE CONTROL window.
For details, see page 25.
DVI-D
AUX
R(P
/C
)
G(Y/Y)
B(P
/C
)
HD
VD
r
r
b
b
IN
OUT
IN
OUT
Monitor cable (not supplied)
to monitor output
Connecting with HD-SDI Equipment
Attach the optional LKRI-002 HD-SDI (4:2:2) or LKRI-
003 HD-SDI (4:4:4) input board to the input board
attachment part, and connect the HDCAM recorder/player.
The illustration below shows an example with the LKRI-
002 attached on INPUT B.
Left side
INTER LOCK ETHERNET
RS232C
HDCAM recorder/player, etc.
Note
When the LKRI-003 is attached to the projector, select the
type of signal with "Signal Mode" of "Input Source" in the
PICTURE CONTROL window. For Single-link input,
select "YPbPr" or "YPbPr FULL". For Dual-link input,
select "RGB" or "RGB FULL".
For details, see page 25.
DVI-D
AUX
IN
OUT
IN connector
IN connector
HD-SDI connecting
cable (not supplied)
to HD-SDI output
SRW-5000
HD DIGITAL VIDEO CASSETTE RECORDER
Connecting the Projector
17