Sony SRX-T105 Installation Manual page 33

8
Click the "CALC" button.
9
Select "Gray10", "Red1", "Green1" and "Blue1" in
"Test Pattern Select" again and measure the values for
x and y in the center of the screen.
10
Check that the difference between the measured value
and the value for "Target Color Gamut" is within
±0.005.
11
Click the "APPLY" button if the difference is within
±0.005.
If the difference is greater than ±0.005, repeat steps 4
to 10 until the value is within ±0.005.
Correcting the Color Characteristics (Color Space Converter)
33