Alarm Indications At A Glance - Brother MP-21C Service Manual

CHAPTER 5
TROUBLE SHOOTING

ALARM INDICATIONS AT A GLANCE

Operator Calls
If a recoverable error occurs, the printer indicates an 'operator call' by
blinking or turning on the
Find the error and take the appropriate action to correct it. The printer
automatically recovers from most errors, but you may need to reset the
printer with the button as described below.
LEDs Error
(Alarm) Paper jam
(On/Off)
Paper empty
Mis-feed
Cover Open
(Alarm)
(On/Off)
(Alarm) No Cartridge
Ink
( (BC) and/or
(MY))
Ink Empty
Ink
( (BC) and/or
(MY))
Ink Nearly
Ink
Empty
( (BC) and/or
(MY))
All Service call
Note
If the printer does not operate as you expect it to, it is recommended that
you unplug the printer, then plug it in and try printing again. If you still
have problems, consult your dealer or our authorized service
representative before returning this product.
(Alarm) LED.
Action
Clear the paper jam by referring to the next section
"PAPER JAMS".
Load paper in the printer by referring to
Reinstall the paper. When using the Auto Cut Sheet
Feeder (MP-21CDX or SF-21MP users only), press
the (On/Off) button after reinstalling the paper
stack into the Feeder.
The Top Cover of the printer is open. Close it to
resume printing.
One or more ink cartridges are not installed
correctly or are missing.
Replace the ink cartridge with a new one.
Indicates that the indicated ink cartridge will run out
soon. You should purchase a new ink cartridge
ready for when Ink Empty is indicated.
See the Service Calls section on the next page.
CHAPTER 5 TROUBLESHOOTING
Chapter 2.
5-1