4.9
Paper Feed Frame ASSY
Note:
The carriage speed adjustment must be done when the Paper feed
frame ASSY is replaced. See 3.2.5 Carriage Control Parameter
Adjustment Mode in Chapter 4.
4.9.1
Paper Feed Motor Holder
<Disassembly>
(1)
Remove the screw, then the Earth plate and Paper feed motor holder from the
Chassis R.
Note:
The Release plate, Gear 10/30, and Gear 10/20 are assembled on the
Paper feed motor holder. Handle the Paper feed motor holder assembly
carefully so as not to lose these three parts.
Gear 10/30
Release plate
Chassis R
Fig. 3.28
Gear 10/20
Fig. 3.29
III-22
Paper feed motor holder
Earth plate
Taptite, bind M26x4
Paper feed motor holder