Advertisement
PPP to Frame Relay Annex G
Application Description
This application allows for a Switched Virtual Circuit connection between the
PPP port and the Frame Relay Service. The PPP connection requires the Network
to establish the connection. (Note: PPP does not support PVC Connections over
Annex G stations.)
The Frame Relay Port uses the Control Protocol Support ANSI T1.617 Annex D.
The Station's DLCI number is auto learned. The Network service will need to call
the Node with an address that has the subaddress equal to the PPP port number
(i.e., 757503 is valid for connection to PPP-3, 999902 is valid for PPP-2.)
Configuration Summary
Port #1 FRI Annex D, ext clk, 1 Auto- learn DLCI Annex G
Port #2 PPP RFC1490 encapsulation, 57600 bps, VJ compression
Port #3 PPP RFC1490 encapsulation, 57600 bps, VJ compression
Connections achieved by the Network Service calling the PPP port.
CTP access via CTP switch or X.25 service calling subaddress 98.
Optional Application CMEMs
V1000003.MEM Standard application as mentioned in Summary
V1000003.001 Port #2 PAD, CTP access via PAD or switch
V1000003.002 Port #1 PPP, Port #2 FRI
V1000003.003 Port #1 PAD, Port #2 FRI
V1000003.004 Port #1 NULL (no daughtercard), Port #2 FRI
V1000003.005 Port #1 X.25, Port #2 FRI (ISDN Perm B1)
Advertisement
