Advertisement
Legend for Figure 1-8
Item
Indicator
No.
¨
Control Port (CP)
¦
Diagnostic (DI)
Figure 1-8. Vanguard 100 PC Rear Bracket
Description
When enabled, overrides the stored configuration,
and sets port 3 (internal PC COM port) to 8 Bits,
No Parity, 1 Stop Bit async 9600 bps.
This will allow Control Port access via the .ctp
command (PAD) or ATDS0 command (ATPAD).
The software option installed will determine
whether port 3 is configured as a default PAD or
AT port.
Used only for factory testing. This switch should
always remain disabled.
Advertisement
