Advertisement
FCC Part 68 and Telephone Company Procedures and Requirements
for DSU
Before the Motorola Vanguard 100 PC can be connected to the network, you
must:
Provide the local telephone company with the equipment's DSU FCC Part
68 registration number, located on the mounting rail of the DSU
daughtercard (see Figure 1-2).
Order the proper connections.
How To Order Connections
To order the proper connections, provide the telephone company with the
following information:
DSU FCC
Part 68
Number
AT9USA-
22886-DD-N
Troubleshooting Your Connection
If any of your equipment is not operating correctly, immediately remove it from
the telephone line before it harms the network. If the telephone company notes the
problem, they may temporarily disconnect your service. They will notify you in
advance of the disconnection, when possible.
Figure 1-2. DSU FCC Part 68 Number
Interface
USOC Jack
Type
Connector
56-kbps
RJ48S
digital
interface
Service Code
Facility
Interface
Code
6.0F
04DU5-56
Advertisement
