Upgrade Kyocera Net Admin - Kyocera TASKalfa 3051ci Operation Manual

Upgrade KYOCERA Net Admin

KYOCERA Net Admin 3.1
CPU: 2.0 GHz, 2.0+ GHz, 1 CPU
Memory: 1 GB, 2 GB
Hard Disk space: 500 MB, 1 GB
KYOCERA Net Admin Agent
CPU: 1.5 GHz, 1 CPU
Memory: 512 MB
Hard Disk space: 250 MB
Enterprise
Devices: Up to 5000
Number of supported networks: Up to 50
KYOCERA Net Admin Server
CPU: 3.0 GHz, 2+ CPU
Memory: 4 GB
Hard Disk space: 2+ GB
KYOCERA Net Admin Agent
CPU: 2.0 GHz, 2+ CPU
Memory: 1 GB
Hard Disk space: 250 MB
Supported Browsers
Microsoft Internet Explorer 7 or higher. Cookies must be enabled.
Supported Printers
Kyocera network printers and most third-party network printers that support
the standard printer Management Information Base (MIB), and printers
connected locally to network computers.
Supported Languages
English, French, German, Italian, Japanese, Portuguese, Spanish.
You can upgrade your older version of KYOCERA Net Admin to the latest
version. Depending on your current version, the following upgrade operations
are required:
All older versions – back up the database, and then restore the database
after installing the new version.
Versions 1.03, 1.04, 1.5 – save settings such as firmware files and Map view
background images, and then manually import them into the new version.
When upgrading from version 2.0 to version 3.x, the Accounting Manager and
Print Job Manager consoles are not supported in the new version.
Since KYOCERA Net Admin 3.x uses agents to communicate with devices,
networks are migrated to the new version with a link to a Local Agent. You
must install local or remote agents using the Add Network wizard or the stand-
alone agent installer.
Devices are migrated as unmanaged and not connected, and are displayed with
default settings. After installation, you should run Networks and Agents > Start
Discovery (Administration console) and Add Devices (Device Manager
Installation
1-2