Stand-Alone Agent Installation - Kyocera TASKalfa 3051ci Operation Manual

Installation
3
4
5
Remote Networks and Remote Agents
Adding a Remote Network and Remote Agent
1
2
3
4

Stand-alone Agent Installation

Installing an Agent with the Stand-alone Installer
1-7
Select Enabled so the Print Spooler will always accept client connections.
Click OK.
Restart the Print Spooler service for changes to this policy to take effect. For
information about restarting the Print Spooler, refer to Microsoft
documentation.
You can obtain access, establish communication, and add a network and agent
to a remote computer. Make sure you have the user name, password, domain,
and IP address of the remote computer. You may have to ask the computer
administrator about your system-specific settings. The remote computer's
firewall must be turned off, or ports TCP 8731 and UDP 162 need to be enabled
for incoming connections in the firewall.
You can add a network and agent to a remote computer.
Open KYOCERA Net Admin in your Internet browser.
Open the port remotely, or ask the computer administrator to do it.
In the Administration console, click Preferences > Networks and agents >
Add Network, and proceed through the wizard to the Enter the Agent Details
page.
Type the Agent Name and Agent IP Address. Type the Agent Port and Agent
Timeout, or accept the defaults. Under Administrator login information for
the remote host (available if you selected New Agent in the previous page),
type the Agent Login, Agent Password, and Agent Domain of the
administrator. Click Next.
Continue and finish the Add Network wizard.
In some situations, an administrator may want to install an agent on a network
other than KYOCERA Net Admin. The administrator can send an agent
installation package to a remote user, and the user can manually install the
agent at their location. If security and communication is set up, KYOCERA Net
Admin can then manage the new remote agent.
To ensure secure communication, the time setting must be no more than 1
minute apart on server and agent computers. For computers in different time
zones, use a global time server or domain time server to ensure synchronized
time settings.
You can install an agent at a location that is remote from the KYOCERA Net
Admin server.
Installation Guide