Usb Device Connections - Kyocera TASKalfa 3051ci Operation Manual

1
2
3
4
Adding a Network to a Remote Agent
1
2
3
4

USB Device Connections

KYOCERA Net Admin 3.1
Copy the folder C:\Program
Files\Kyocera\NetAdmin\Admin\install\agent\standalone-install (C drive is the
default) to the target computer.
Note: A security certificate is created during the installation of KYOCERA Net
Admin that links the agents to it. You must use the folder at the path above to
create a stand-alone agent installer. If you use a folder from the KYOCERA Net
Admin package before it is installed on your server, agent communication will
fail.
Open the folder and run the Setup.exe file. You must have administrator rights
on the computer.
On the Install Service page, click Install. The progress of the installation is
displayed on the next page. The agent service files are copied to the KYOCERA
Net Admin location in the folder: C:\Program Files\Kyocera\NetAdmin\Agent (C
drive is the default).
On the Installation Completed page, click Close to exit the wizard.
You can add a network to an existing remote agent (installed by the stand-alone
installer).
Open KYOCERA Net Admin in your Internet browser.
In the Administration console, click Preferences > Networks and agents >
Add Network, and proceed through the wizard to the Enter the Agent Details
page.
Type the Agent Name, and Agent IP Address. Type the Agent Port, and
Agent Timeout, or accept the defaults. Leave the administrator login
information blank. Click Next.
Continue and finish the Add Network wizard.
KYOCERA Net Admin can discover and manage local USB devices (connected
to computers in the network) through the Local Device Agent (LDA). It displays
them in the device list the same way as network-connected devices. The LDA
can support several USB connected devices at the same time, but KYOCERA
Net Admin shows only one of them.
Install the USB device to the computer first, then the LDA.
Requirements
The following requirements are needed for the USB connection and LDA to
function correctly:
KYOCERA Net Admin must be installed and operating on the server.
Microsoft Windows XP SP3 or higher operating system must be installed on
the computer.
Microsoft .NET Framework 4.0 or higher must be installed on the computer.
Installation
1-8