Limitations - Kyocera TASKalfa 3051ci Operation Manual

Limitations

• If the data required for importing is not set, default values are automatically set when a file is
saved.
• The use restriction of Account List depends on the copy counter setting (Total/Individual) of
Device Accounting Settings.
To edit the total use restriction when opening the Account List file, set the copy counter setting of
Device Accounting Settings to Total in advance. To edit the individual use restriction, set the copy
counter setting of Device Accounting Settings to Individual in advance.
• FS-1024MFP and FS-1124MFP are not supported.
• In the edit dialogs of Device Accounting Settings and Account List, default values are not automat-
ically input. If not input, default values are reflected when data is input to the MFP.
• When converting data, setting values not supported by the conversion target model may be left
blank.
• In particular models, import data is not reflected in the keyboard login setting of Device Authenti-
cation Settings.
• In the port No. setting of Device Authentication Settings, a blank may be left in the Setup Tool UI
for the models not supported by the maintenance mode U917.
• In A4 MFP, the title column of the address book cover page is grayed out and the contents cannot
be changed.
• Data can be entered in the UI even for the models that do not support one touch key name setting.
(FS-1028MFP, FS-1128MFP, LS-1028MFP, LS-1128MFP, KM-2810, KM-2820, FS-3040MFP,
FS-3140MFP, LS-3140MFP, FS-C2026MFP, FS-C2126MFP)
• User list is overwritten when imported to the MFP. For this reason, if Admin, i.e., default adminis-
trator, has not been created with Setup Tool, no Admin will be registered to the MFP if registered
as is.
• In the maintenance mode U917, only reading is available for KM-3050, KM-4050, KM-5050, and
TASKalfa 300i. They can be opened but no file can be saved (created) in these two models.
4-2