Kyocera TASKalfa 3051ci Operation Manual page 10

Data reading/writing
1. Insert the USB memory into the USB slot of MFP.
2. Enter maintenance mode U917.
3. For reading, press [Export] and for writing, press [Import]. Then, select the items to
perform.
* When writing, if the selected item is not found in the USB memory, an error message will
appear.
4. Press the start key. Data reading/writing starts.
The progress status is displayed on the screen.
5. When the progress status reaches 100%, pull out the USB memory after confirming that it
can be safely removed.
* After writing, the MFP must be restarted.
6. Insert the USB memory into the USB slot on PC.
2-4